Kirjoitusalusta.fi
Koko ruutu

Server Notice:

hide

Julkinen työtila Latest text of pad hacklab-osalistat Tallennettu Helmikuu 17, 2016

 
     
Lainataan (L) / myydään (M) / annetaan hyvään kotiin (A) osia
Can lend (L) / sell (M) / give for good purpose (A) parts
 
Helsingin läbin ns ylijäämälista: http://kirjoitusalusta.fi/hacklab-ylijaama
 
 
qriff (2014-10-04)
  • (A) iRobot Roomba 500
  • Fully working condition, including all accessories.
 
Hukka (päivitetty 2011-10-12)
  • Parts are in Espoo, ask in IRC
  • (L/M 4€) couple TI MSP430 Launchpads
  • (L) Arduino Mega 2560
  • (A/M) basic components for sudden need
 
 
zzorn (updated 2011-11-12)
  • Parts at lab, ask in person at lab or on IRC
  • (M) Selling RGB Led strip, 60 leds / meter, 12V, common anode, adhesive back
  • 10€ / meter
 
rambo (2014-02-03)
  • Various parts @lab or @kirkkonummi, ask me. I also have @kirkkonummi small vertical mill (yläjyrsin), lathe (sorvi) and bandsaw (vannesaha) for metalworking with soft metals and 60A plasma cutter that should go through 10mm steel (now @stadi mallarit)
  • (M) Neurosky dry-sensor EEG ASIC on breakout board (aka TGAM), 57600 serial com, handles FFT etc inside the ASIC (4 pcs left), 37EUR/ea
  • (M/A) I2C Level shifters (can't remember the exact model offhand), if you have 1.8V parts you want to interface with 5V microcontroller like Arduino you will need one of these. ~1EUR /ea
  • (A) breakout boards for two different kinds of SD-card slot/holder/thingy, I'll check the models when I remember. Note only the boards, you need to source the thingy yourself (got mine from RS)
  • (A) breakout/led adapter -boards for 4 SMD 595 shift-registers, again board only. There is a bunch of those SMD 595s @lab.
  • (A/M) ATTIny85 and ATMega168 SMD bare chips, we have couple of AVRISPs at the lab you can use to flash them
  • (A) ATTiny85/45/25 SMD breakout boards https://github.com/rambo/attiny_boards a bunch of boards from two first revisions (have minor silkscreen bugs and the earliest revision has no provision for xtal [not that you're likely even want it])
  • As explained on the linked page, the SMD parts are a lot cheaper than DIP ones, size is a consideration too...
 
 
suovula (2012-07-23)
  • Parts at lab, ask on IRC
  • (L) Hall-sensors: switches, linears and rotary-encoders, ask for more details
 
kimka (updated 2012-05-16)
email: before writing @nic.fi, add kimka.
  • (M) Portable air conditioner (the one at Hacklab) - 190 euros/make offer
  • (M) Lego Mindstorms NXT 2.0 (LEGO 8547), mint conditon, used twice - 220 euros/make offer
 
PullaEmu (2012-10-2)
  • @lab
  • (L/M) STM32F0Discovery (10e)
  • (L/M) STM32F4Discovery (20e)
  • @Munkkivuori
  • (L/M) DS1307 RTC w/eeprom (5e)
  • (A) Basic components (E12 through hole / 0805 resistors, few opamps, BJTs etc)
 
jimki (2013-01-28)
  • (M) 17" 4:3 4-wire touch screen glass with USB controller (45e)